Falmec

---

👉 Upgrade your Flipper NRS® hood’s recirculation performance—install the Falmec High Performance Carbon Filter (101078897) for superior odor and grease removal in filter-only mode.

---

🏷️ Product Title & SKU

High Performance Carbon Filter
• SKU/EAN: 101078897

---

🔎 Overview

The Falmec High Performance Carbon Filter (101078897) is engineered specifically for the Flipper NRS® series and other compatible hoods in Falmec’s Silence NRS® collection. This washable, reusable filter pair (sold individually) combines an activated-carbon membrane with a metal mesh exterior to trap up to 75 % of grease particulates and neutralize cooking odors during recirculation mode. Unlike standard charcoal filters, it is designed for frequent reactivations—washable in a dishwasher (≤ 65 °C) and easily recharged in a home oven—delivering up to three years of reliable performance under normal use.

---

📐 Technical Specifications

Attribute	Specification
Model	High Performance Carbon Filter (Type “NRS®”)
SKU/EAN	101078897
Compatibility	Falmec Flipper NRS® hoods; fits Silence NRS® models with internal cavity ≥ 383 × 255 × 140 mm
Filter Type	Activated-Carbon Membrane + Aluminum Frame + Metal Mesh Exterior
Dimensions (W × H × D)	343 × 241 × 50 mm (filter media)
Material	• Frame: Anodized Aluminum • Mesh: Grease-proof Steel • Media: Activated Carbon with Zeolite Additive
Filtration Efficiency	75 % grease capture; high VOC/odor adsorption
Washable & Reusable	Dishwasher-safe (≤ 65 °C); oven-reactivation at 100 °C for 10 min
Lifespan	~ 3 years (6–8 reactivation cycles)
Net Weight	0.23 kg (approx.)
Operating Voltages	N/A (passive, no electrical components)
Country of Origin	Italy
Warranty	2 Years (materials & workmanship)

---

🧰 What’s Included

Each High Performance Carbon Filter (101078897)

• 1 × Carbon Filter Assembly (343 × 241 × 50 mm)
  • Anodized aluminum frame with integrated metal mesh
  • Carbon-zeolite membrane media
  • Built-in metal handle for easy removal and installation

• Installation & Care Instructions (wash/regeneration procedure)

Note:

• Sold individually; Flipper NRS® hoods require two filters for full recirculation coverage.

• Ensure your hood’s canopy cavity accommodates a 343 × 241 × 50 mm assembly before ordering.

• Reactivation: Wash at ≤ 65 °C, then heat in a domestic oven at 100 °C for 10 minutes. Let cool fully before reinstalling.

---

💡 Features & Benefits

• High Filtration Efficiency
  Captures 75 % of grease particulates at the source while adsorbing cooking odors. Ideal for recirculation setups where external venting isn’t possible.

• Washable & Reusable Design
  The anodized-aluminum frame and grease-proof mesh allow dishwasher cleaning (max 65 °C). Simple oven reactivation restores full carbon adsorption capacity—no single-use disposables.

• Durable Materials
  • Anodized Aluminum Frame: Resists corrosion in humid environments.
  • Grease-Proof Steel Mesh: Adds structural support and initial grease trapping.
  • Carbon-Zeolite Media: Extends adsorption life beyond standard charcoal filters, achieving up to 3 years of service.

• Easy Installation & Removal
  Integrated metal handle lets you slide the filter in and out of the hood’s canopy cavity without tools. Metal frame aligns with existing NRS® mounting brackets.

• Cost-Effective Over Time
  Because it is reactivable rather than disposable, you save on replacement costs—one set lasts approximately 36 months, compared to quarterly disposable filters.

• OEM-Approved Accessory
  Factory-designed for Falmec’s Flipper NRS® and Silence NRS® hoods. Maintains hood warranty when installed per instructions.

---

❓ Frequently Asked Questions

Q1: Which hoods are compatible with the 101078897 filter?

• A1: Primarily Flipper NRS® hoods and other Silence NRS® models (e.g., Flipper NRS 55 cm/85 cm). Ensure your hood’s canopy cavity dimensions are at least 343 × 241 × 150 mm to accommodate the filter plus any lighting panel.

Q2: How do I install the filter?

• A2:

  1. Disconnect power at the breaker and remove the hood’s grease-filter panel.

  2. Slide the filter (343 × 241 × 50 mm) into the internal cavity, ensuring it seats flush against the rubber gasket.

  3. Reassemble the grease filter and canopy. Restore power and set the hood to Recirculation Mode—air will pass through the carbon mesh before returning to the room.

Q3: How do I know when to reactivate or replace the filter?

• A3:

  • With Dialogue-equipped Flipper NRS® hoods, the display will show “CA” when carbon adsorption capacity is low. Plan for oven reactivation every 3 months under heavy use, or 18 months under normal use.

  • After roughly 6–8 reactivations (≈ 3 years), replace the filter with a new 101078897 to maintain peak performance.

Q4: What is the reactivation procedure?

• A4:

  1. Remove the filter assembly from the hood.

  2. Dishwasher Wash: Clean the metal mesh in a dishwasher (≤ 65 °C) using mild detergent—do not combine with other items.

  3. Oven Reactivation: Preheat a domestic oven to 100 °C. Place the filter in the oven for 10 minutes to drive off absorbed odors and moisture.

  4. Allow the filter to cool completely, then reinstall.

  5. Q5: Does this filter affect hood noise levels?

• A5: Minimal impact. Air passing through the carbon media introduces a slight backpressure, but the robust Flipper NRS® motor (up to 750 m³/h) compensates. Noise levels remain within published ranges (up to 66 dB(A) at Boost).

Q6: Can I use 101078897 in extraction (ducted) mode?

• A6: No. The High Performance Carbon Filter is exclusively for recirculation. To operate in extraction mode, remove this filter and install standard ductwork to the hood’s Ø 150 mm outlet.

---

🏡 Lifestyle Integration & Pairing Ideas

Flipper NRS® in Urban Condos

• In city apartments without duct access, install 101078897 under a Flipper NRS® 55 cm White Glass hood. Run at Speed 3 (500 m³/h) during weekday meal prep; switch to Boost (750 m³/h) when hosting. The high-performance carbon filter traps cooking odors, maintaining fresh air in compact spaces.

Loft-Style Kitchens with Exposed Brick

• Pair a Flipper NRS® 85 cm Satin Black hood with 101078897 filters. The black-glass canopy and Fasteel® steel band complement industrial décor, while the filter’s sleek aluminum frame blends seamlessly into the canopy cavity. Enjoy near-silent recirculation (≈ 58 dB(A) at Speed 3) during weekend cooking.

Historic Renovations & Apartments

• Convert a Silence NRS® wall hood to recirculation using 101078897. Its slim profile preserves original high-ceiling lines. When “CA” appears, the homeowner easily reactivates the filter, avoiding exterior vent modifications that might violate preservation codes.

---

👉 Ensure fresher, odor-free air—add the Falmec High Performance Carbon Filter (101078897) to your Flipper NRS® hood today, reactivate every 3 months (normal use every 18 months), and replace after 3 years for uninterrupted performance.