🏷️ Product Title & SKU

• Carbon.Zeo Filter – Spare
  • SKU / EAN: KACL.935

---

🔎 Overview

KACL.935 is a regenerable Carbon.Zeo filter designed to work with Falmec wall‐mounted and under‐cabinet recirculation (filtering) hoods that utilize the Carbon.Zeo® system. When installed, it traps grease, odors, and microparticles, allowing purified air to be recirculated back into the kitchen without a duct run. To restore full adsorption capacity, simply bake the filter in a conventional oven at 110 °C for 60 minutes when prompted by your hood’s display.

---

📐 Technical Specifications

Attribute	Specification
SKU / EAN	KACL.935
Description	Carbon.Zeo® regenerable filter – Spare
Application	Compatible with Falmec recirculating hoods (Carbon.Zeo models)
Dimensions (max)	550 mm × 270 mm × 15 mm (approx.) [packaging width = 550 mm]
Net Weight	2.0 kg
Filter Media	Activated charcoal + natural zeolite blend
Regeneration Method	Bake in home oven at 110 °C for 60 minutes to renew adsorption
Compatible Units	Any Falmec hood or accessory that uses a Carbon.Zeo® under‐cabinet or horizontal/vertical recirculation filter (e.g., SHELF, ZERO, QUANTUM PRO EASY when fitted with Carbon.Zeo kit)
Packaging Dimensions	550 mm (width) × 350 mm (height) × 50 mm (depth) (approx.)
Country of Origin	Italy
Warranty	2 Years (follow hood manufacturer’s filter‐replacement guidelines)

Note: KACL.935 is distinct from other Carbon.Zeo spare codes (e.g., KACL.931 or KACL.963). It is sold as a standalone, double‐layer charcoal‐zeolite filter—no frame or housing included.

---

🧰 What’s Included

• 1 × Carbon.Zeo® Filter Cartridge (KACL.935)
  • Pre‐assembled activated charcoal + zeolite media
  • No additional frames, brackets, or housings included

Tip: When your hood indicates “CA” (Charcoal Alert), remove KACL.935 and bake at 110 °C for 60 minutes. Allow to cool completely before reinstalling—this restores the filter’s full adsorption capacity.

---

💡 Features & Benefits

1. Regenerable Carbon.Zeo® Media

   • Combines high‐grade activated charcoal with natural zeolite to capture smoke, grease, and cooking odors.

   • Oven‐regenerable—no need for frequent replacements. Just bake to refresh.

2. Broad Compatibility

   • Works with any Falmec hood or module that supports Carbon.Zeo filter cartridges—commonly used in SHELF, ZERO, QUANTUM PRO EASY, and other under‐cabinet/ceiling hoods.

3. Cost‐Effective & Eco‐Friendly

   • Each KACL.935 cartridge can be regenerated up to 6–8 times before end of life, reducing waste and ongoing filter costs.

4. High Adsorption Capacity

   • The zeolite‐enhanced media allows for extended filter life and improved odor reduction, even under heavy cooking loads.

5. Easy to Replace & Maintain

   • Slide the old cartridge out, place KACL.935 into the filter housing, and close—no tools required.

   • When the hood’s display flashes “CA,” simply follow the regeneration instructions.

---

❓ Frequently Asked Questions

1. Which hoods use KACL.935?
   • Any Falmec filtering (recirculation) hood or accessory that lists Carbon.Zeo® filter as an option. Typical models include SHELF 60/90, ZERO EASY, QUANTUM PRO EASY, BRERA, and similar under‐cabinet or kitchen‐island hoods.

2. How do I regenerate KACL.935?

   1. Remove from the hood’s filter housing when “CA” appears on the hood display.

   2. Preheat a domestic oven to 110 °C.

   3. Bake the cartridge upright on a wire rack for 60 minutes.

   4. Turn off the oven and allow the filter to cool completely before reinstalling.

   5. Reinsert into the housing—your hood will resume full filtering performance.

3. How often should I regenerate or replace KACL.935?
   • Regenerate when prompted (typically every 6–12 months, depending on cooking frequency).
   • After 6–8 bake cycles, the filter media will begin to lose capacity; replace with a fresh KACL.935.

4. Can I use KACL.935 in a ducted (extracting) installation?
   • No. KACL.935 is intended only for recirculation (filtering) mode. In ducted installations, simply remove the cartridge and operate your hood without it.

5. Is KACL.935 compatible with other brands’ hoods?
   • No. The dimensions, media composition, and housing fitment are specific to Falmec’s Carbon.Zeo® system. Use only KACL.935 in compatible Falmec filter housings.

6. Does KACL.935 come with a frame or grille?
   • No. It is supplied as a stand‐alone cartridge. If you need a full under‐cabinet or ceiling‐hood filter kit, order the corresponding kit (e.g., KACL.930, KACL.951, KACL.1043, etc.) which includes both media and housing.

---

🏡 Lifestyle Integration & Pairing Ideas

• Apartment & Condo Kitchens (No Ducting Possible):
  Use KACL.935 with your Falmec recirculating hood (e.g., SHELF, ZERO EASY, or BRERA) to maintain fresh, odor‐free air without external venting. Regenerate the filter semiannually to keep maintenance simple and eco-friendly.

• Family‐Friendly Cooking:
  With KACL.935 installed, your hood will silently capture smells from stir‐fries, broths, and frying—ideal for open‐plan homes where lingering odors can travel into living areas.

• Sustainable Renos & Green Builds:
  Regenerable filters like KACL.935 support green‐building certifications by reducing single‐use filter waste. Bake‐to‐clean means fewer new cartridges purchased over your kitchen’s lifetime.

• Professional‐Grade Home Kitchens:
  Even under heavy, restaurant‐style cooking, KACL.935’s blend of charcoal and zeolite maintains strong odor control. When you need maximum performance, install a second KACL.935 in parallel if your hood’s housing allows.

---

👉 Keep your kitchen air fresh—order KACL.935 Carbon.Zeo filter (2 kg) today and enjoy regenerable odor control in your Falmec recirculating hood!